Cyberchef, I’ve looked at but honestly for me, IT Tools works best for my needs so it’s all good on my end.
Cyberchef, I’ve looked at but honestly for me, IT Tools works best for my needs so it’s all good on my end.
Dozzle is just log viewing plain and simple. Dockge shows more that’s all I know. I tested Dockge earlier on in development and haven’t been back since, I know it’s grown a lot more since.
I’ve seen a few mentions of PiHole and AdguardHome, I started on PiHole, then moved to AdguardHome for adblocking. Then I heard about and have been using TechnitiumDNS server which is sort of overkill for our needs, but with the right ad-lists, it is fantastic at blocking advertisements on my home network. Super fast install too, even on a Raspberry Pi 2 :) I run that along with Proxmox-VE (Protected behind OIDC Login) and several other containers on my cranky old Dell Desktop server.
Mostly Vaultwarden, and a few other services for home private use such as PairDrop for inter system sharing and a self destructing file sharing server for when we need to send documents to our Attorney’s (rarely but sometimes we need to) office via Pingvin.
I also run:
With Authentik setup, I can login to things like my Fresh Tomato Router TechnitiumDNS (Both use HTTP Auth headers) and Memos which uses OIDC/SSO. It’s meant to replace our Google Keep notes.
docker logs -follow
command.I still use Portainer-CE and am happy there, I may try Dockage or the others, but it’s fine for what I need it for (It’s also protected by OIDC)
I’m sure I may have missed a few, but this post has gone on long enough. :)
You can always use something like SSHwifty It retains your logins through your browser’s session data and never on your server, but it will allow you to remote into your local system from anywhere on the WWW if you desire to do so. With Tailscale, once you are connected into your Tailnet, you can pretty much SSH into any of your devices as long as the subnet sharing flag is turned on I believe. I’ve never had any issues with mine not allowing any SSH connections.
Homebox - before we relocate - whenever that is, I will be printing labels and putting them under and behind my stuff, scanning it into there and then will use that to keep track of our items after the move to know what is in which box etc.
NocoDB Self Hosted (I use this for a few things) - started out with my network ip’s I have on my servers and ports for my containers and most recently a sleep log.
Just a couple there.
Grafana + Prometheus dashboards can be quite addicting or useful. Noted.lol put together a nice tutorial for getting started.
For most of my services though, I simply use Uptime Kuma which then sends an alert to Gotify when my services go down or whatnot, Gotify then instantly notifies my phone so I can be aware. It helps keep the spouse happy when their go to service for some reason crashed. :)
From their readme. I asked about that last night and he replied an pointed me to it. :)
Kiosk mode
Kiosk mode can be activated by a checkbox on the page. Note that there is no way out of kiosk mode (except refresh or closing the browser), and the play/pause and other controls will not be available. This is deliberate as a browser’s kiosk mode it intended not to be exited or significantly modified.
It’s also possible to enter kiosk mode using a permalink. First generate a Permalink, then to the end of it add &kiosk=true. Opening this link will load all of the selected displays included in the Permalink, enter kiosk mode immediately upon loading and start playing the forecast.
I didn’t see IIS mentioned, but I didn’t take a close look at the code. They give you a docker run command to set it up, so I converted it to a docker compose file so I can run it later. All of this is running on a Debian 12 system, so if IIS is needed, I’d wager that is if you are running a Windows setup.
I have mine embedded in Home Assistant now as an iframe using the Kiosk mode setting which works.
Looks nice! I set mine up and have it as an Iframe in Home Assistant. The app is a fork from https://github.com/vbguyny/ws4kp with his demo site here: https://battaglia.ddns.net/twc That version has the music we all came to know and love from back then.
Authentik is my IDP provider so I put it in front of all my publicly facing Apps which support OIDC login. For example, I can log into my Portainer instance from an external network, but to do so, I log into Authentik First which sends it to my service.
For the apps which support HTTP headers, like I said, Pomerium acts as the service which passes my credentials to the device. I admit - Authentik does this also without the need for Pomerium, (through their flow settings) but I found Pomerium to be much easier to set up for this than Authentik and haven’t looked back or felt the need to change it.
With that, I use Pomerium for apps which accept a HTTP Headers, for example, my Fresh Tomato firmware flashed router, it has a HTTP dialog. This allows me to login from the road if I need to manage something like rebooting it or updating firewall rules etc.
My access flow is this :
router.example.com —> Cloudflare Tunnel —> Pomerium IP —>Authentik —> Router’s Gui.
It works flawlessly. I don’t often use it, but when I do, it helps. I also had it enabled for AdguardHome but moved to Technitium DNS which I prefer and that doesn’t have the HTTP Headers so it’s not fully compatible with Pomerium that I’m aware of.
https://www.youtube.com/@cooptonian His Authentik videos are top notch and they (Authentik) have also had him make some for them. One of those videos, I can’t recall shows you how to do this, I think it may be the 2FA/MFA one. I use Authentik and can login with fingerprint login without using my UN/PW first. It’s pretty slick.
I am a former IT Desktop drone…er…support worker… I used to swap towers for my local municipality back when Windows XP was being replaced with 7. I saw passwords on post-its attached to the monitor, mouse pad, and even under the keyboard or keyboard drawer (I had to get under desks to do the swap). Our policy was to remove those whenever we saw them and trash them in a different can across the building or a different one. They have a standard 90 day password cycle and most people couldn’t handle that. I would answer the phone often to 'unlock" their account after 3 attempts. My all time favorite when I would help an end user with software was when I would encounter someone’s “God Mode” icon for some of the registry hacks that used to float around. Everyone had Admin privileges (ironically), so it wasn’t really needed anyway.
Their primary server admins and IT folks in the main office were Top notch though. Never any downtime and the main security guy was very strong in making sure everything was adhered to. We, as desktop support didn’t have the master password to decrypt a laptop which was GPG protected and had to bring it to him if we had a user which locked themselves out. With great consternation, only a few machines would be allowed to XP and those were VLAN’d and isolated from the outside world.
The rest of the server admins handled everything with ease seemingly. The fun part was when they had a third party come in and do a security audit. No problems on the server side, but it wasn’t a success. They did the 'ol drop a flash drive randomly in different locations test. Knowing human nature, they knew someone would pick it up, plug it in and be baited with an excel file which looked like it had financials. Unbeknownst to the user, it sent a ping to their reporting server and the drive ID. Which was later reported back. They also did physical security penetration tests - walk in behind you type of thing. I remember seeing a group of guys non company ID badges try to follow me into the main IT office. I stopped them and asked who they were and what they wanted (this was a Govt building), and the look of confusion mixed with satisfaction from them that I stopped them was priceless. I let the head IT guy know who was at the door and left it up to them to unlock it for them.
I now work in a help desk position for a software company and miss those days of desktop support. But, I know for a fact that I.T. Guys an Gals don’t get enough recognition. They are the understated backbone of a company’s well-being especially when holidays and weekends are prime time for systems to fail and they are practically on call no matter what.
I am testing it and it seems to run every 5 minutes to sync. Handles standard IMAP and POP inboxes. No auth for main page, so they caution appropriately to avoid public facing web exposure. They are planning on adding more support for Gmail and the like:
https://github.com/bandundu/email-archiver/issues/6
It installs by default in debug mode which may or may not be a red flag depending on your security model.
The email search is fast, but could use work, I will say it is VERY early in development. But for downloading email for later storage, it should do. It stores your e-mails in a SQLite database in the same directory as the installer, so if you want to manipulate the compose file a bit, it should be able to point to your desired storage directory. With that said, I also was able to add a TZ= directive so my logs at least are a bit cleaner with timestamps to match my timezone, something they have not added.
If you wish to access this remotely before they add a public facing login, protect it with a SSO solution or other front facing login setup so it would not be accessible. Or securely access it via Wireguard, TailScale, or Headscale.
I use Proxmox and don’t use Truenas. My setup is basically to install Cockpit on the host server via apt-get and then the 45 Drives cockpit-sharing plugin. This provides the NFS and Samba sharing I need and use. I host Home Assistant in a VM and Docker containers in a few LXC containers which host about 10 containers each. Then, in combination with https://tteck.github.io/Proxmox/ you can set up pretty much anything you need from there.
This is on in computer terms, ancient; a 13 year old Dell Optiplex 990 with 16gb Ram and software such as Authentik and Vaultwarden from different dedicated LXC containers. Never have any issues with overload of the system resources or running out of memory. It’s pretty much rock solid.
Tailscale is but since you already tried them, maybe headscale that’s supposed to be the self hosted version of Tailscale that someone wrote, so you have better odds at less latency! https://headscale.net/
Zerotier? Not sure -https://www.zerotier.com/ can speak more to this.
If behind CGNAT and forwarding is not an option, Headscale, Tailscale or ZeroTier may be an option. I use Tailscale and it have ZERO forwarding on and can access anything on my network when connected through it. Think of these as Wireguard on Steroids. :)
As Another Proxmox user - I’ve been doing well with it. I use these scripts for the LXC’s which has been fantastic:
https://tteck.github.io/Proxmox/
I also can log into it from the web as it’s secured by Authentik, SSO OIDC login when Away from home and need to manage it. Rare! But the option is there! :)
The older IDE drives with the 5.25" platters and smaller ones make great wind chimes. The laptop ones are a bit .ore fragile due to thinner material. Years ago, we used to do this with a few of them.
If the app supports SSO and allows user creation, then it’s just a matter of passing the user claims such as username or email which the app expects from your provider.
I use Authentik as my solution, which uses a GUI for user management and supports all major SSO options, from MFA, to OIDC, SAML, LDAP and more.
I took a quick read of the comments and I apologize in advance if this has been suggested already.
I use a self hosted DNS server (AdGuardHome) I was using TechnitiumDNS for a long while, but moved over to the other recently so I could do some more blocking as needed (adult special needs house dweller sometimes needs limited internet). It also acts as a DHCP Server so it takes the role of both the DHCP assignments away from the router. As it so happens, this week, I got to experience the benefit of having this setup live when my main router also went down, I was able to switch to a spare router (My ISP provided one) and all I had to do was turn the DHCP off and optionally point the DNS To my AdGuardHome address, set the SSID’s up and I was in business. All of my devices happily reconnected and grabbed their assigned IP’s.
In short, if you have a spare computer, SBC such as a raspberry PI or whatnot, you can easily host something like that and not have to worry about setting those again.