Living in cruddy apt. Anger management neighbor slamming doors constantly. Bed shakes, waking me up.

Previously, what works is anti vibration layers under bed. Prosourcefit exercise puzzle mats, quietwalk flooring underlayment, felt rug pad with rubber backing, thick cut high pile rug, anti vibration pads.

That normally works. But not with this insane dude. Can I build some sort of platform under bed, on rollers, like how buildings cope with earthquakes?

I’m looking for creative engineering solutions, out of the box ideas.

  • Granixo@feddit.cl
    link
    fedilink
    arrow-up
    70
    ·
    1 year ago

    Best idea is to move the hell out of there 🏃‍♂️🏢

    If the building isn’t solid enough already to isolate noise and prevent shaking, then there’s little that you can do.

  • alphacyberranger@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    33
    ·
    edit-2
    1 year ago

    Dampers like those used for washing machines for your bed and while you are at it maybe put some gasket or nitrile tape in between your neighbours door as well.

  • President_Pyrus@feddit.dk
    link
    fedilink
    arrow-up
    22
    ·
    1 year ago

    Maybe obvious, but have you tried to talk to the neighbor?

    In my previous apartment I had a shitty door that was hard to close without slamming it, and I didn’t realize how much it disrupted my neighbors when I slammed it to close it. Instead I started to turn the lock while closing it, which worked perfectly.

  • Hazdaz@lemmy.world
    link
    fedilink
    arrow-up
    14
    ·
    1 year ago

    Is the door that is being slammed a common door (like in the common hallway) you have access to? If so, install a damper on the door so it slowly closes. The more he pushes, the more it fights him.

    If yiu don’t have access to the door, then get anti vibration levelers for your bed. There are lots of different ones. Some go under the existing leveler feet, while others would replace the leveler feet altogether so just make sure the thread is the same size. The rubber that these vibration isolators use varies in hardness. It might take some experimenting but you want a rubber that is soft enough that it compresses some when the weight of the bed and you are on it, but not so soft that it bottoms out.

    Washing Machine Foot Pads for Anti-vibration and Anti-Walk | Washer and Dryer Anti Slip Mat with Rubber Technology | Ideal for Vibration Reduction and Shock Absorber | Rubber Isolation Feet Set of 4 https://a.co/d/28dNhk6

  • milkisklim@lemm.ee
    link
    fedilink
    arrow-up
    13
    ·
    1 year ago

    Have you complained to the supervisor’s office yet?

    They might care if enough people complain and evict the guy.

    • CeruleanRuin@lemmings.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      1 year ago

      Or even install door closers and/or bumpers on the neighbor’s door sills. OP could offer to chip in for dampening measures, that would go a long way towards making the super want to help.

    • 200ok@lemmy.world
      link
      fedilink
      arrow-up
      13
      ·
      1 year ago

      If possible, pull the bed away from the walls where most of the vibration will be absorbed.

  • 31415926535@lemm.eeOP
    link
    fedilink
    arrow-up
    6
    ·
    edit-2
    1 year ago

    I’m already tried most all suggestions. Bed away from wall, low bed frame, made of wood, not metal, anti vibration pads. This is an old apt filled with addicts, mental health issues. No job, on ssi, can’t move, unless I want to be homeless again. Trying to make what I have works. Only response I got, haven’t tried, was platform on springs, rollers. Tks to everyone.

    Oh, talking to neighbor, landlords, not applicable. Cops, screaming, fights breaking out, meth heads, everyone smoking cigs in their apartments… someone with anger issues simply slamming doors … it can be so much worse. Trying to cope best I can

  • hactar42@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    1 year ago

    Have you tried moving your bed away from the wall? Or even to the opposite side from where the door is?

  • Maoo [none/use name]@hexbear.net
    link
    fedilink
    English
    arrow-up
    9
    arrow-down
    4
    ·
    1 year ago

    Man that really sucks.

    I’m guessing that it’s not reasonable to get the guy to chill or get the builsing tuned up so that it doesn’t transmit so much vibration.

    The “ideal” wouls be a platform that can move laterally (and a little vertically) but that damps the vibration. Imagine a platform the bed sits on, but with springs below it. Or something fancier that acts like a spring but uses another mechanism. This way, the bed will move less initially (the floor will move and the bed will have to “catch up” based on the weaker + delayed pull of the spring) ans be damped.

    Keep in mind that I haven’t tested any of this, but here are a couple ideas.

    1. Casters/rollers, each of them on a little square (maybe silicon?) that keeps them from rolling too far. This will have weak lateral damping ans probably zero vertical. Imagine something like this but you actually buy one larger than specified so it can still move a bit: https://www.amazon.com/Yupeak-Bed-Stopper-Furniture-Pack(Black)/dp/B07MPR999F/

    2. Put a box spring under your mattress and literally attach springs on the bottom and sides so that it only contacts your bed frame / floor (not sure what your setup is) via springs. Strong springs so that they don’t bottom out when you lay on the bed but not so strong that they don’t damp enough. Probably bed springs, basically.

    3. A second soft mattress to put under your mattress. It’s basically just a set of springs and is already the right size. This is probably the best option.

    Also, if your bed is next to the wall, move it 2-3 inches away from it.

    Hope this helps!

    • 31415926535@lemm.eeOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      You gave a serious response, what I was looking for. Tyvm, I’ll look into what you suggested